Aluminium door draft protection

Stop the draft. Keep the comfort.

A discreet retrofit system that seals unwanted drafts, whistles and dust through exposed aluminium door latch openings.

Designed in the Western Cape. Built for the South Easter.

Created to solve a small problem that makes a big difference.

Interested? Watch Installation
WindSeal installed on aluminium door latch opening
Looks like it was always meant to be there.
Stops draftsKeeps cold air outside.
Silences whistlesReduces wind noise.
Reduces dustHelps keep interiors cleaner.
Discreet designNeat, simple finish.
Removable coverAccess when needed.
Coastal readyDesigned for windy places.
The problem

Every gust finds the gap.

Many aluminium doors have exposed latch openings that allow unwanted air, noise and dust to enter your home.

WindSeal provides a simple, discreet solution.

Seal the gap. Keep comfort inside.

Aluminium door latch opening before WindSeal cover is fitted
BeforeExposed opening
WindSeal cover installed on aluminium door
AfterWindSeal fitted
Installation

Installs in under 5 minutes.

Only simple tools are required: a drill with a 5 mm drill bit and a rivet gun.

1 Drilling out the existing top rivet with a 5 mm drill bit

Drill out the existing top rivet

Use a 5 mm drill bit to carefully drill out the existing top rivet.

2 Countersunk rivet and countersunk round magnet ready for installation

Assemble the rivet and magnet

Fit the supplied countersunk rivet through the separate countersunk round magnet.

3 Installing the countersunk rivet and magnet using a rivet gun

Install the top fixing

Make sure the countersunk side of the magnet faces towards the rivet gun, then secure the rivet.

4 Installing the lower rivet and magnet fixing

Repeat for the bottom rivet

Drill out the bottom rivet and repeat the same fixing process.

5 Both countersunk round magnets installed on the aluminium door

Check the two magnets

Confirm both countersunk round magnets are secure and aligned.

6 WindSeal cover attached over the latch opening

Attach WindSeal

Place the cover onto the magnets to seal the latch opening.

Available colours

Choose the finish that suits your door.

WindSeal is available in two colours designed to complement most aluminium doors.

White

For white aluminium doors and bright interiors.

Black

For black, charcoal and modern architectural finishes.

Final installed WindSeal cover on aluminium door
The result

Looks like it was always meant to be there.

Simple, discreet and purpose-built to stop drafts through exposed aluminium latch openings.

No tape. No foam. No ugly temporary fix.

FAQ

Quick answers.

Does installation require drilling?

Yes. The existing top and bottom rivets are drilled out using a 5 mm drill bit.

What tools are required?

A drill, 5 mm drill bit and rivet gun are required.

Can the cover be removed?

Yes. The cover attaches to the installed magnets and can be removed when access is needed.

Is it suitable for coastal areas?

WindSeal is designed for windy coastal environments.

Interested in WindSeal?

If you have a drafty aluminium door and would like to know more, email: